Skip to main content

Shimadzu instruments in Seal

Seal Edge collects the files Shimadzu software saves and sends each original to Seal, linked to its sample, method and run.

Shimadzu instruments to SealInstrument export

Seal reads
Exports from LabSolutions, LabSolutions UV-Vis and 19 more
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Shimadzu HPLC / UHPLC systems

  • LabSolutions
  • LabSolutions LCMS
  • Chromeleon CDSSaves report exports selected in the installed Chromeleon version
  • and 1 more

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and injection

  • Retention time
  • Peak area
  • Amount
  • Original file, kept
How a result from the Shimadzu HPLC / UHPLC systems reaches Seal.

Results from the Shimadzu HPLC / UHPLC systems come from LabSolutions, LabSolutions LCMS or Chromeleon CDS, among 4 applications.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in LabSolutions, LabSolutions LCMS or Chromeleon CDS: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

LabSolutions
31 models: HPLC / UHPLC systems, LC-MS systems, gas chromatographs, GC autosamplers, LC detectors, ion chromatographs, preparative chromatography systems and SFC systems.
LabSolutions UV-Vis
6 models: UV-Vis spectrophotometers.
LabSolutions IR
3 models: FTIR spectrometers.
LabSolutions TOC
3 models: TOC analyzers.
LabSolutions GCMS
2 models: GC-MS systems.
LabSolutions ICPMS
2 models: ICP-MS.
LabSolutions Insight
2 models: GC-MS systems.
MALDI Solutions
2 models: mass spectrometers.
WingSALD II
2 models: particle size analyzers.
AMsolution
1 model: FTIR spectrometer.
IC Solution
1 model: ion chromatograph.
ICPEsolution
1 model: ICP-OES.
iFlagger
1 model: LC-MS system. Saves results as text or CSV.
LabSolutions LCMS
1 model: HPLC / UHPLC system.
LabSolutions RF
1 model: spectrofluorometer.
MALDImini Console
1 model: mass spectrometer. Saves mzML or mzXML files.
PCEDX Navi
1 model: XRF spectrometer. Saves Excel reports.
PCEDX Pro
1 model: XRF spectrometer. Saves HTML or Excel reports.
Prep Solution
1 model: SFC system.
WingSALD bio
1 model: particle size analyzer.
WizAArd
1 model: atomic absorption spectrometer.
Chromeleon CDSThermo Fisher Scientific
126 models: LC pumps, LC autosamplers, LC detectors, HPLC / UHPLC systems, gas chromatographs, column ovens, GC autosamplers, LC system controllers, chemical reaction boxes and degassers. Saves report exports selected in the installed Chromeleon version.
ClarityDataApex
14 models: gas chromatographs, LC detectors, LC pumps and GC autosamplers. Saves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf).

Saved by the instrument

TOC-1000e
1 model: TOC analyzer. Saves CSV or PDF files to a USB drive.
TOC-4200
1 model: TOC analyzer. Saves measured values as CSV files to a USB drive.
UV-1280
1 model: UV-Vis spectrophotometer. Saves spectra and time-course data to a USB drive.

3The Shimadzu models.

These are Shimadzu instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

HPLC / UHPLC systems

A chromatogram for each injection, integrated into peaks with retention times, areas and amounts, and reported per sample in a sequence.

  • LC 2010A
  • LC 2010C
  • LC-2030 LC-2030C LC-2030C 3D LC-2040C LC-2040C 3D LC-2030C LT LC-2040C LT LC-2040C MT LC-2040C 3D MT
  • LC-2030 Plus LC-2030C Plus LC-2030C 3D Plus LC-2040C Plus LC-2040C 3D Plus LC-2030C LT Plus LC-2040C LT Plus LC-2040C MT Plus LC-2040C 3D MT Plus
  • LC-2030C
  • LC-2030C 3D
  • LC-2030C 3D Plus
  • LC-2030C NT
  • LC-2030C Plus
  • LC-2040C
  • LC-2040C 3D
  • LC-2040C 3D Plus
  • Show all 32 models
  • LC-2040C Plus
  • LC-2050 LC-2050C LC-2050C 3D LC-2050C LT LC-2060C LC-2060C 3D LC-2060C 3D MT
  • LC-2050C
  • LC-2050C 3D
  • LC-2060C
  • LC-2060C 3D
  • LC-2070
  • LC-2070C
  • LC-2070C 3D
  • LC-2080
  • LC-2080C
  • LC-2080C 3D
  • Nexera Amino Acid Analysis System
  • Nexera FV
  • Nexera MX
  • Nexera X3
  • Nexera X4
  • Nexera XR
  • Nexera XS inert
  • Prominence-i

Gas chromatographs

A chromatogram for each injection, integrated into peaks with retention times, areas and amounts.

  • Brevis GC-2050
  • GC 2010/GC-2010Plus
  • GC 2014
  • GC-14A
  • GC-14B
  • GC-14C
  • GC-17A
  • GC-2010
  • GC-2010 Plus
  • GC-2010 Pro
  • GC-2025
  • Nexis GC-2030
  • Show all 26 models
  • Nexis GC-2060
  • OCI-2030
  • OCI-2030NX
  • OCI-NX-U(1.0)
  • PTV-2030
  • PTV-U(1.0)
  • SINJ-2030
  • SINJ-U(1.0)
  • SPI-U(1.0)
  • SPL-2030
  • SPL-U(1.0)
  • Tracera
  • WBI-2030
  • WBI-U(1.0)

LC pumps

Flow, solvent composition and pressure, recorded by the chromatography data system with each injection; the results come from the detector.

  • LC-6A Pump
  • LC-6AD Pump
  • LC-8A Pump
  • LC-10AD Pump
  • LC-10AD, LC-10Ai, LC- 10AT
  • LC-10ADvp Pump
  • LC-10Ai Pump
  • LC-10AS Pump
  • LC-10ASvp Pump
  • LC-10AT Pump
  • LC-10ATvp Pump
  • LC-20AB Pump
  • Show all 26 models
  • LC-20AD Pump
  • LC-20ADXR Pump
  • LC-20Ai Pump
  • LC-20AT Pump
  • LC-30AD Pump
  • LC-40B X3 Pump
  • LC-40B XR Pump
  • LC-40D Pump
  • LC-40D X3 Pump
  • LC-40D XR Pump
  • LC-40D XS Pump
  • LC-40D XSi Pump
  • LC-40D, LC-40D XR, LC-40B XR, LC-40D XS, LC-40D X3, LC-40B X3
  • LC-40i Pump

LC detectors

The detector’s signal over time is the chromatogram; the chromatography data system integrates its peaks into retention times, areas and amounts.

  • CDD-10Avp Detector
  • ELSD-LT III
  • MPM-40
  • RF-10A Detector
  • RF-10AXL Detector
  • RF-20A Detector
  • RF-20AXS Detector
  • RID-10A Detector
  • RID-20A Detector
  • SPD-10A Detector
  • SPD-10Ai Detector
  • SPD-10AV Detector
  • Show all 23 models
  • SPD-10AVi Detector
  • SPD-10Avp Detector
  • SPD-10AVvp Detector
  • SPD-20A Detector
  • SPD-20AV Detector
  • SPD-40 Detector
  • SPD-40V Detector
  • SPD-M10Avp Detector
  • SPD-M20A Detector
  • SPD-M30A Detector
  • SPD-M40 Detector

LC autosamplers

Which vial and volume each injection took, recorded with its chromatogram so each result keeps its sample.

  • SIL-10A Autosampler
  • SIL-10ADvp Autosampler
  • SIL-10AF Autosampler
  • SIL-10Ai Autosampler
  • SIL-10AXL Autosampler
  • SIL-20A (HT, UFLC) Autosampler
  • SIL-20AC (HT, UFLC) Autosampler
  • SIL-20ACXR Autosampler
  • SIL-20AXR Autosampler
  • SIL-30AC Autosampler
  • SIL-30ACMP Autosampler
  • SIL-40 Autosampler
  • Show all 21 models
  • SIL-40 XR Autosampler
  • SIL-40, SIL-40C, SIL-40 XR, SIL-40C XR, SIL-40C XS, SIL-40C X3
  • SIL-40C Autosampler
  • SIL-40C X3 Autosampler
  • SIL-40C XR Autosampler
  • SIL-40C XS Autosampler
  • SIL-40C XSi Autosampler
  • SIL-HTA Autosampler
  • SIL-HTC Autosampler

Column ovens

The column temperature, set in the method and recorded with each injection.

  • CTO-10A Column Oven
  • CTO-10AC Column Oven
  • CTO-10ACvp Column Oven
  • CTO-10ASvp Column Oven
  • CTO-10Avp Column Oven
  • CTO-20A Column Oven
  • CTO-20AC Column Oven
  • CTO-30A Column Oven
  • CTO-30AS Column Oven
  • CTO-40C Column Oven
  • CTO-40S Column Oven

GC autosamplers

Which vial each injection took, with the headspace or desorption conditions where they apply, recorded with its chromatogram.

  • AOC-20i Auto Injector
  • AOC-20i Plus Auto Injector
  • AOC-20i+s
  • AOC-20s Autosampler
  • AOC-30i Auto Injector
  • AOC-30i+s
  • AOC-5000 Plus Autosampler
  • HS-10 Headspace Sampler
  • HS-20 Headspace Sampler
  • HS-20 HS-20 Trap HS-20 LT
  • HS-20 NX Headspace Sampler

LC-MS systems

Chromatograms with mass spectra, processed into amounts of target compounds or the masses and identities of what was found.

  • LCMS-2020
  • LCMS-2050
  • LCMS-8045RX
  • LCMS-8050
  • LCMS-8050RX
  • LCMS-8060NX
  • LCMS-8060RX
  • LCMS-8065XE
  • LCMS-9030
  • LCMS-9050
  • Nexera Mikros

UV-Vis spectrophotometers

Absorbance at set wavelengths or across a spectrum, converted to concentration where a method applies.

  • SolidSpec-3700i
  • SolidSpec-3700i DUV
  • UV-1280
  • UV-1900i Plus
  • UV-2600i Plus
  • UV-2700i Plus
  • UV-3600i Plus

LC system controllers

Connects the modules to the chromatography data system, which runs the sequence and records the results.

  • CBM-20A System Controller
  • CBM-20Alite System Controller
  • CBM-40 System Controller
  • CBM-40lite System Controller
  • SCL-10Avp System Controller
  • SCL-40 System Controller

Mass spectrometers

Mass spectra, processed into identified compounds or quantified amounts.

  • AXIMA Assurance
  • AXIMA Confidence
  • AXIMA Performance
  • MALDI-8020
  • MALDI-8030
  • MALDImini-1

TOC analyzers

Total organic carbon for each sample, from the carbon dioxide measured after oxidation.

  • TOC-1000e
  • TOC-4200
  • TOC-L CPH
  • TOC-L CSH
  • TOC-V WP

FTIR spectrometers

An infrared spectrum, with an identity or a quantity where a library or method is applied.

  • AIMsight
  • IRSpirit-X
  • IRTracer-100
  • IRXross

GC-MS systems

A chromatogram with a mass spectrum for each scan, processed into identified compounds and their amounts.

  • GCMS-QP2020 NX
  • GCMS-QP2050
  • GCMS-TQ8040 RX
  • GCMS-TQ8050 RX

Particle size analyzers

A particle size distribution with its summary values, such as Dv50 or a mean size.

  • Aggregates Sizer
  • iSpect DIA-10
  • SALD-2300
  • SALD-7500nano

ICP-MS

Element and isotope concentrations per sample, with the calibration and internal-standard recoveries behind them.

  • ICPMS-2030
  • ICPMS-2040
  • ICPMS-2050

XRF spectrometers

Element contents of a solid or liquid sample, from the X-ray fluorescence it emits.

  • EDX-7200
  • EDX-8100
  • EDX-LE

Fraction collectors

Where each fraction went and the part of the chromatogram it was collected from.

  • FRC-10A Fraction Collector
  • FRC-40 Fraction Collector

Ion chromatographs

A conductivity chromatogram for each injection, integrated into anion or cation concentrations.

  • HIC-ESP
  • Nexera IC

SFC systems

A chromatogram for each injection, integrated into peaks as in HPLC, with carbon dioxide as the main mobile phase.

  • Nexera UC
  • Nexera UC Prep

Atomic absorption spectrometers

Element concentrations per sample from absorbance against a calibration.

  • AA-7800

Chemical reaction boxes

  • CRB-40

Degassers

  • DGU-20AS

ICP-OES

Element concentrations per sample from emission at chosen wavelengths, with the calibration behind them.

  • ICPE-9800

Microvolume spectrophotometers

Absorbance converted to nucleic acid or protein concentration, with purity ratios such as A260/A280.

  • BioSpec-nano

Preparative chromatography systems

The run’s UV, conductivity and pressure curves, with the fractions collected and where each came from.

  • Nexera Prep

Spectrofluorometers

Fluorescence emission and excitation spectra, or intensities at set wavelengths.

  • RF-6000

Other

  • CRG-2030
  • GasSelector2030
  • PRG-2010Plus
  • PRG-2030

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Shimadzu instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.