Skip to main content

Bruker instruments in Seal

Seal Edge collects the files Bruker software saves and sends each original to Seal, linked to its sample, method and run.

Illustration of a seal beside a Bruker ALPHA II FTIR spectrometer.

Bruker instruments to SealInstrument export

Seal reads
Exports from OPUS, TopSpin and 6 more
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Bruker FTIR spectrometers

  • OPUSSaves OPUS ASCII or JCAMP spectral exports

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and measurement

  • Spectrum
  • Library match
  • Result
  • Original file, kept
How a result from the Bruker FTIR spectrometers reaches Seal.

Results from the Bruker FTIR spectrometers come from OPUS.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in OPUS: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

OPUS
11 models: FTIR spectrometers, Raman spectrometers and NIR spectrometers. Saves OPUS ASCII or JCAMP spectral exports.
TopSpin
4 models: NMR spectrometers.
BioPharma Compass
2 models: mass spectrometers.
MBT Compass HT
2 models: microbial detection systems.
SCiLS Lab
2 models: mass spectrometers.
IconNMR
1 model: NMR spectrometer.
ProteoScape
1 model: LC-MS system.
Sierra SPR control software
1 model: surface plasmon resonance system.

3The Bruker models.

These are Bruker instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

FTIR spectrometers

An infrared spectrum, with an identity or a quantity where a library or method is applied.

  • ALPHA II
  • CONFOCHECK
  • HTS-XT
  • HYPERION II
  • IFS 125HR
  • INVENIO
  • LUMOS II
  • MATRIX-MF II
  • MOBILE-IR II
  • VERTERA
  • VERTEX NEO

LC-MS systems

Chromatograms with mass spectra, processed into amounts of target compounds or the masses and identities of what was found.

  • compact
  • EVOQ DART-TQ+
  • impact II VIP
  • timsMetabo
  • timsOmni
  • timsOmni Sigma
  • timsTOF fleX
  • timsTOF fleX MALDI-2
  • timsTOF HT
  • timsTOF Pro 2
  • timsUltra AIP

Mass spectrometers

Mass spectra, processed into identified compounds or quantified amounts.

  • autoflex maX
  • microflex LRF
  • neofleX
  • rapifleX
  • scimaX
  • smartfleX
  • solariX
  • timsMRMS
  • ultrafleXtreme

Surface plasmon resonance systems

Sensorgrams of binding over time, fitted to association and dissociation rates and affinity (KD).

  • MASS-1
  • MASS-2
  • Sierra SPR-24 Pro
  • Sierra SPR-32 Pro
  • SPR-2
  • SPR-2-MK2
  • SPR-4

NMR spectrometers

NMR spectra, used to confirm structure and, with a reference, to measure content.

  • AVANCE NEO
  • AVANCE NEO NanoBay
  • AVANCE NEO-X
  • AvanceCore
  • Fourier 80

NIR spectrometers

A near-infrared spectrum, with an identity or a content where a model is applied.

  • BEAM
  • MATRIX-F II
  • MPA III
  • TANGO II

Raman spectrometers

A Raman spectrum, with an identity or a concentration where a library or model is applied.

  • BRAVO
  • HyperFlux PRO Plus
  • RAM II
  • SENTERRA II

Cell analyzers

  • Beacon Discovery Optofluidic System
  • IsoLight System
  • IsoSpark

GC-MS systems

A chromatogram with a mass spectrum for each scan, processed into identified compounds and their amounts.

  • ecTOF
  • EVOQ GC-TQ

Microbial detection systems

  • MALDI Biotyper sirius
  • MALDI Biotyper sirius one

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Bruker instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.