Skip to main content

SPECTRO instruments in Seal

Seal Edge collects the files SPECTRO software saves and sends each original to Seal, linked to its sample, method and run.

SPECTRO instruments to SealInstrument export

Seal reads
Exports from SPECTRO ICP Analyzer Pro and SPECTRO ICP-MS Analyzer Pro
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

SPECTRO ICP-OES

  • SPECTRO ICP Analyzer Pro

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and run

  • Element
  • Wavelength
  • Concentration
  • Original file, kept
How a result from the SPECTRO ICP-OES reaches Seal.

Results from the SPECTRO ICP-OES come from SPECTRO ICP Analyzer Pro.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in SPECTRO ICP Analyzer Pro: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

SPECTRO ICP Analyzer Pro
3 models: ICP-OES.
SPECTRO ICP-MS Analyzer Pro
1 model: ICP-MS.

3The SPECTRO models.

These are SPECTRO instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

ICP-OES

Element concentrations per sample from emission at chosen wavelengths, with the calibration behind them.

  • SPECTRO ARCOS
  • SPECTRO GENESIS
  • SPECTROGREEN

ICP-MS

Element and isotope concentrations per sample, with the calibration and internal-standard recoveries behind them.

  • SPECTROGREEN MS

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your SPECTRO instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.