Skip to main content

JASCO instruments in Seal

Seal Edge collects the files JASCO software saves and sends each original to Seal, linked to its sample, method and run.

JASCO instruments to SealInstrument export

Seal reads
Exports from Spectra Manager
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

JASCO HPLC / UHPLC systems

  • ClaritySaves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf)

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and injection

  • Retention time
  • Peak area
  • Amount
  • Original file, kept
How a result from the JASCO HPLC / UHPLC systems reaches Seal.

Results from the JASCO HPLC / UHPLC systems come from Clarity.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Clarity: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

Spectra Manager
35 models: FTIR spectrometers, UV-Vis spectrophotometers, Raman spectrometers, spectrofluorometers and circular dichroism spectrometers. Saves X/Y text, CSV and JCAMP (.dx) files.
ClarityDataApex
17 models: LC detectors and LC pumps. Saves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf).

3The JASCO models.

These are JASCO instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

LC detectors

The detector’s signal over time is the chromatogram; the chromatography data system integrates its peaks into retention times, areas and amounts.

  • CD-1595 Detector
  • CD-2095 Detector
  • CD-4095 Detector
  • CL-2027 Detector
  • FP-821 Detector
  • FP-920 Detector
  • FP-2020 Detector
  • FP-2025 Detector
  • FP-4020 Detector
  • FP-4025 Detector
  • OR-2090 Detector
  • RI-2031 Detector
  • UV-975 Detector
  • UV-1575 Detector
  • UV-2070 Detector
  • UV-2077 Detector

UV-Vis spectrophotometers

Absorbance at set wavelengths or across a spectrum, converted to concentration where a method applies.

  • MSV-5200
  • MSV-5500
  • MSV-5700
  • V-630
  • V-670
  • V-730
  • V-750
  • V-760
  • V-770
  • V-780

FTIR spectrometers

An infrared spectrum, with an identity or a quantity where a library or method is applied.

  • FT/IR-4X
  • FT/IR-6X
  • FT/IR-8X
  • IRT-5X
  • IRT-7X
  • IRT-1000X
  • VIR-100
  • VIR-200
  • VIR-300

Raman spectrometers

A Raman spectrum, with an identity or a concentration where a library or model is applied.

  • NRS-4500
  • NRS-5000 Series
  • NRS-7000 Series
  • PR-1w
  • RMP-510
  • RMP-520
  • RMP-530

Circular dichroism spectrometers

A circular dichroism spectrum, read for secondary structure, or followed against temperature for stability.

  • High-Throughput Circular Dichroism System (HTCD)
  • J-810
  • J-820
  • J-1100
  • J-1500
  • J-1700

Spectrofluorometers

Fluorescence emission and excitation spectra, or intensities at set wavelengths.

  • FP-8250
  • FP-8300
  • FP-8350
  • FP-8500
  • FP-8550
  • FP-8650

LC pumps

Flow, solvent composition and pressure, recorded by the chromatography data system with each injection; the results come from the detector.

  • PU-880 Pump

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your JASCO instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.