Skip to main content

Sykam instruments in Seal

Seal Edge collects the files Sykam software saves and sends each original to Seal, linked to its sample, method and run.

Sykam instruments to SealInstrument export

Seal reads
Exports from Clarity
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Sykam HPLC / UHPLC systems

  • ClaritySaves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf)

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and injection

  • Retention time
  • Peak area
  • Amount
  • Original file, kept
How a result from the Sykam HPLC / UHPLC systems reaches Seal.

Results from the Sykam HPLC / UHPLC systems come from Clarity.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Clarity: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

ClarityDataApex
18 models: LC detectors, LC pumps, LC autosamplers, HPLC / UHPLC systems and column ovens. Saves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf).

3The Sykam models.

These are Sykam instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

LC detectors

The detector’s signal over time is the chromatogram; the chromatography data system integrates its peaks into retention times, areas and amounts.

  • RI2000 Detector
  • S3245 Detector
  • S3250 Detector
  • S3585 Detector
  • S3590 Detector

LC pumps

Flow, solvent composition and pressure, recorded by the chromatography data system with each injection; the results come from the detector.

  • S1122 Pump
  • S1125 Pump
  • S1130 Pump
  • S1132 Pump
  • S2100 Pump

LC autosamplers

Which vial and volume each injection took, recorded with its chromatogram so each result keeps its sample.

  • S5200 Autosampler
  • S5250 Autosampler
  • S5300 Autosampler

Column ovens

The column temperature, set in the method and recorded with each injection.

  • S4115 Column Oven
  • S4120 Column Oven

HPLC / UHPLC systems

A chromatogram for each injection, integrated into peaks with retention times, areas and amounts, and reported per sample in a sequence.

  • S 500 HPLC
  • S 600 HPLC

Other

  • S4300 Amino Acid Reaction Module System

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Sykam instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.