Skip to main content

Teledyne ISCO instruments in Seal

Seal IoT collects the files PeakTrak saves and sends each original to Seal over outbound HTTPS, linked to its sample, method and run.

Illustration of a seal following a sample vial to an analytical instrument and its result.

Teledyne ISCO instruments to SealInstrument export

Seal reads
Exports from PeakTrak
Writes back
No
Source of truth
Instrument software
Set up
Seal IoT and an upload Script

1How the results reach Seal.

In the laboratory

Teledyne ISCO preparative chromatography systems

  • PeakTrakSaves run files as XML text or PDF, to a USB drive or network share
  • ClaritySaves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf)

Export folder

On the workstation or a network share

Seal IoT

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Purification run

  • Peak
  • Fraction
  • Elution volume
  • Original file, kept
How a result from the Teledyne ISCO preparative chromatography systems reaches Seal.

Results from the Teledyne ISCO preparative chromatography systems come from PeakTrak or Clarity.

Seal IoT runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in PeakTrak or Clarity: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

PeakTrak
5 models: preparative chromatography systems and SFC systems. Saves run files as XML text or PDF, to a USB drive or network share.
ClarityDataApex
4 models: fraction collectors. Saves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf).

3The Teledyne ISCO models.

These are Teledyne ISCO instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Fraction collectors

Where each fraction went and the part of the chromatogram it was collected from.

  • FOXY 200 Fraction Collector
  • FOXY Jr. Fraction Collector
  • FOXY R1 Fraction Collector
  • FOXY R2 Fraction Collector

Preparative chromatography systems

The run’s UV, conductivity and pressure curves, with the fractions collected and where each came from.

  • ACCQPrep HP150
  • CombiFlash EZ Prep
  • CombiFlash NextGen

SFC systems

A chromatogram for each injection, integrated into peaks as in HPLC, with carbon dioxide as the main mobile phase.

  • ACCQPrep SFC
  • CombiFlash SFC

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Teledyne ISCO instruments.