1The PerkinElmer models.
These are PerkinElmer instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.
LC detectors
- 785A Detector
- Flexar ELSD
- Flexar Fluorescence LC Detector
- Flexar FX-PDA UHPLC Detector
- Flexar FX-UV/Vis UHPLC Detector
- Flexar PDA LC Detector
- Flexar PDA Plus Detector
- Flexar Refractive Index LC Detector
- Flexar UV/Vis LC Detector
- LC 300 Fluorescence Detector
- LC 300 PDA/MWD Detector
- LC 300 Refractive Index Detector
- LC 300 UV/Vis Detector
- LC-235C Diode Array Detector
- PE Series 200 LC DAD
- PE Series 200 UV/Vis Detector
- Series 200 Diode Array Detector
- Series 200 Fluorescence Detector
- Series 200 Refractive Index Detector
- Series 200 UV/Vis Detector
- Series 200a Fluorescence Detector
- Series 200EP Diode Array Detector
Gas chromatographs
- AutoSystem GC
- AutoSystem XL GC
- Clarus 400 GC
- Clarus 400, 480, 580
- Clarus 480 GC
- Clarus 500
- Clarus 500 GC
- Clarus 580 GC
- Clarus 590
- Clarus 590 GC
- Clarus 600
- Clarus 600 GC
- Clarus 680
- Clarus 680 GC
- Clarus 690
- Clarus 690 GC
- Clarus Nova GC System
- GC 2400 System
- GCMS 2400
LC pumps
- Flexar Binary LC Pump
- Flexar FX-10 UHPLC Pump
- Flexar FX-15 UHPLC Pump
- Flexar FX-20
- Flexar Isocratic LC Pump
- Flexar Quaternary LC Pump
- LC 300 Analytical Pump
- LC 300 Binary Pump
- LC 300 Quaternary Pump
- PE Series 200 LC Micro Pump
- PE Series 200 LC Quaternary Pump
- Series 200 Micro Pump
- Series 200 Pump
- Series 275 Micro Pump
- Series 410 Pump
GC autosamplers
- HS 40 XL
- HS 2400 Headspace Sampler
- HS 2400 M Headspace Autosampler
- TurboMatrix HS 16
- TurboMatrix HS 40
- TurboMatrix HS 40 Trap
- TurboMatrix HS 110
- TurboMatrix HS 110 Trap
- TurboMatrix MultiPrep Sampler
LC autosamplers
- Flexar FX UHPLC Autosampler
- Flexar LC Autosampler
- ISS 200 Autosampler
- LC 300 Autosampler
- PE Series 200 LC Autosampler
- Series 200 Autosampler
- Series 225 Autosampler
- Series 275 Autosampler
Atomic absorption spectrometers
- FIMS 100
- FIMS 400
- PinAAcle 500
- PinAAcle 900F
- PinAAcle 900H
- PinAAcle 900T
- PinAAcle 900Z
HPLC / UHPLC systems
- Altus A-10
- Altus A-30
- LC 300 HPLC System
- LC 300 UHPLC System
- QSight LX50 UHPLC
- Series 275 HRes System
Column ovens
- Flexar LC Column Oven
- Flexar Peltier LC Column Oven
- LC 300 Column Oven
- PE Series 200 Column Oven
- Series 200 Column Oven
FTIR spectrometers
- Spectrum 3
- Spectrum 3 Optica
- Spectrum Two
- Spotlight 400
- Spotlight Aurora
LC-MS systems
- QSight 110
- QSight 210
- QSight 220
- QSight 420
- QSight 500
NIR spectrometers
- DA 7250
- DA 7350
- DA 7440
- FT 9700
- Spectrum Two N
ICP-OESs
- Avio 220 Max
- Avio 550 Max
- Avio 560 Max
- Avio 3000
UV-Vis spectrophotometers
- LAMBDA 265
- LAMBDA 365+
- LAMBDA 465
- LAMBDA 1050+
ICP-MSs
- NexION 1100
- NexION 2200
- NexION 5000
Spectrofluorometers
- FL 6500
- FL 8500
Other
- ATD 400
- TurboMatrix 100 TD
- TurboMatrix 150 ATD
- TurboMatrix 300 TD
- TurboMatrix 350 ATD
- TurboMatrix 650 ATD
2How Seal collects the results.
Seal IoT runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. For these instruments that is usually Chromera, Empower, Simplicity 3Q, SimplicityChrom, Spectrum 10, Spectrum FL and Syngistix. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.
A Seal Script checks the export’s layout, resolves the run and sample it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and the vendor’s analysis stay in the instrument software: Seal collects completed results and sends no instructions to the instrument.
How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.
3Start with one instrument.
Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your PerkinElmer instruments.