Skip to main content

SCIEX instruments in Seal

Seal Edge collects the files SCIEX software saves and sends each original to Seal, linked to its sample, method and run.

Illustration of a seal beside a SCIEX Triple Quad 6500+ mass spectrometer.

SCIEX instruments to SealInstrument export

Seal reads
Exports from SCIEX OS, Analyst and 4 more
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

SCIEX LC-MS systems

  • SCIEX OS
  • AnalystSaves Analyst Results Table text exports
  • Analyst TF

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and injection

  • Compound
  • Mass
  • Amount
  • Original file, kept
How a result from the SCIEX LC-MS systems reaches Seal.

Results from the SCIEX LC-MS systems come from SCIEX OS, Analyst or Analyst TF.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in SCIEX OS, Analyst or Analyst TF: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

SCIEX OS
14 models: LC-MS systems.
Analyst
9 models: LC-MS systems. Saves Analyst Results Table text exports.
Analyst TF
3 models: LC-MS systems.
32 Karat
1 model: capillary electrophoresis system. Saves electropherograms as ASCII or AIA (.cdf) files.
Biologics Explorer software
1 model: capillary electrophoresis system.
EmpowerWaters
1 model: capillary electrophoresis system. Saves ASCII raw-data exports (.arw) and separately configured result reports.

3The SCIEX models.

These are SCIEX instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

LC-MS systems

Chromatograms with mass spectra, processed into amounts of target compounds or the masses and identities of what was found.

  • 3200 QTRAP
  • 4000 QTRAP
  • API 2000
  • API 3000
  • API 3200
  • API 4000
  • API 5000
  • Citrine
  • Echo MS+
  • novus V55
  • QTRAP 4500
  • QTRAP 5500
  • Show all 26 models
  • QTRAP 6500+
  • SCIEX 4500MD
  • SCIEX 7500+
  • Triple Quad 3500
  • Triple Quad 4500
  • Triple Quad 5500
  • Triple Quad 6500+
  • TripleTOF 4600
  • TripleTOF 5600
  • TripleTOF 6600
  • X500B QTOF
  • X500R QTOF
  • ZenoTOF 7600+
  • ZenoTOF 8600

Capillary electrophoresis systems

An electropherogram for each sample, integrated into peaks for size, charge variants or purity.

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your SCIEX instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.