Skip to main content

Logos Biosystems instruments in Seal

Seal Edge collects the files Logos Biosystems software saves and sends each original to Seal, linked to its sample, method and run.

Logos Biosystems instruments to SealInstrument export

Seal reads
Exports from CountWire and CELENA X Explorer
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Logos Biosystems cell counters

  • CountWire

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Culture sample

  • Viable cells/mL
  • Viability
  • Mean diameter
  • Original file, kept
How a result from the Logos Biosystems cell counters reaches Seal.

Results from the Logos Biosystems cell counters come from CountWire.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in CountWire: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

CountWire
2 models: cell counters.
CELENA X Explorer
1 model: high-content imaging system. Saves TIF, PNG or JPG images and MP4 movies.

Saved by the instrument

CELENA S Digital Imaging System
1 model: imaging system. Saves TIFF, JPG, BMP or PNG images and measurement data to a USB drive.
LUNA-BX7 Automated Cell Counter
1 model: cell counter. Saves PDF, CSV and TIFF files over USB or the network.
LUNA-FX7 Automated Cell Counter
1 model: cell counter. Saves a CSV summary or PDF report over the network or to a USB drive.
LUNA-II Automated Cell Counter
1 model: cell counter. Saves TIF images and PDF reports to a USB drive.
LUNA-III Automated Cell Counter
1 model: cell counter. Saves TIF images and PDF reports to a USB drive or the network.
LUNA-STEM Automated Fluorescence Cell Counter
1 model: cell counter. Saves PDF reports with images and data.

3The Logos Biosystems models.

These are Logos Biosystems instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Cell counters

Total and viable cell counts, viability and cell size for each sample.

  • LUNA-BX7 Automated Cell Counter
  • LUNA-FL Dual Fluorescence Cell Counter
  • LUNA-FX7 Automated Cell Counter
  • LUNA-II Automated Cell Counter
  • LUNA-II YF
  • LUNA-III Automated Cell Counter
  • LUNA-STEM Automated Fluorescence Cell Counter
  • QUANTOM Tx Microbial Cell Counter

High-content imaging systems

Images of each well and field, analysed into measurements per cell or per well.

  • CELENA X High Content Imaging System

Imaging systems

Images with their acquisition settings, and measurements where analysis software takes them.

  • CELENA S Digital Imaging System

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Logos Biosystems instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.