1How the results reach Seal.
In the laboratory
Mabtech ASTOR 2 and IRIS 2
- Apex
- Mabtech ApexSaves .raw, .jpg, .xlsx and .pzfx files
Export folder
On the workstation or a network share
Seal Edge
Waits until each file is complete, then sends it
Outbound HTTPSNo inbound connection
Nothing is written back to the instrument or its software
In Seal
Seal Script
Checks the file’s layout and matches it to its record
Record
Sample and image
- Image
- Measurement
- Settings
- Original file, kept
Results from the Mabtech ASTOR 2 and IRIS 2 come from Apex or Mabtech Apex.
Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.
A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Apex or Mabtech Apex: Seal collects completed results and sends nothing back to the instrument or its software.
How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.
2The software and what it saves.
- Apex
- 1 model: imaging system.
- Mabtech Apex
- 1 model: imaging system. Saves .raw, .jpg, .xlsx and .pzfx files.
- Mabtech Opal
- 1 model: automated immunoassay system. Saves results as one Excel file.
3The Mabtech models.
These are Mabtech instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.
Imaging systems
Images with their acquisition settings, and measurements where analysis software takes them.
- ASTOR 2
- IRIS 2
Automated immunoassay systems
Analyte concentrations for each sample from the assay’s calibration curve.
- EYRA
4Where the results go next.
Connection guides
Blueprints
- Analytical development →
Connect method experiments and performance to the intended analytical purpose.
- QC laboratory →
Follow samples from receipt through testing and result review.
5Start with one instrument.
Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Mabtech instruments.