Skip to main content

Miltenyi Biotec instruments in Seal

Seal Edge collects the files Miltenyi Biotec software saves and sends each original to Seal, linked to its sample, method and run.

Illustration of a seal beside a Miltenyi MACSQuant Analyzer 10 flow cytometer.

Miltenyi Biotec instruments to SealInstrument export

Seal reads
Exports from MACSQuantify and MACSQuantify Tyto Software
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Miltenyi Biotec flow cytometers

  • MACSQuantifySaves MACSQuantify statistics exports and FCS files
  • MACSQuantify Tyto Software

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and acquisition

  • Population
  • Count
  • % of parent
  • Original file, kept
How a result from the Miltenyi Biotec flow cytometers reaches Seal.

Results from the Miltenyi Biotec flow cytometers come from MACSQuantify or MACSQuantify Tyto Software.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in MACSQuantify or MACSQuantify Tyto Software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

MACSQuantify Tyto Software
2 models: flow cytometers.

3The Miltenyi Biotec models.

These are Miltenyi Biotec instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Flow cytometers

An FCS file of events for each sample, gated into population counts and percentages.

  • MACSQuant Analyzer 10
  • MACSQuant Analyzer 16
  • MACSQuant Tyto Cell Sorter
  • MACSQuant Tyto Lux Cell Sorter
  • MACSQuant VYB
  • MACSQuant X

Imaging systems

Images with their acquisition settings, and measurements where analysis software takes them.

  • MACSima System
  • UltraMicroscope Blaze

4Where the results go next.

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Miltenyi Biotec instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.