1How the results reach Seal.
In the laboratory
Lighthouse Worldwide Solutions particle counters
- LMS XChangeSaves Excel (.xlsx), CSV and PDF exports
- LMS ExpressSaves Excel, CSV, BMP and JPEG exports
- LS SoftwareSaves PDF and CSV reports
Export folder
On the workstation or a network share
Seal Edge
Waits until each file is complete, then sends it
Outbound HTTPSNo inbound connection
Nothing is written back to the instrument or its software
In Seal
Seal Script
Checks the file’s layout and matches it to its record
Record
Location and sample
- ≥0.5 µm
- ≥5.0 µm
- Volume
- Original file, kept
Results from the Lighthouse Worldwide Solutions particle counters come from LMS XChange, LMS Express or LS Software.
Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.
A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in LMS XChange, LMS Express or LS Software: Seal collects completed results and sends nothing back to the instrument or its software.
How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.
2The software and what it saves.
- LMS XChange
- 22 models: particle counters. Saves Excel (.xlsx), CSV and PDF exports.
- LMS Express
- 6 models: particle counters and air samplers. Saves Excel, CSV, BMP and JPEG exports.
- LS Software
- 2 models: particle counters. Saves PDF and CSV reports.
Saved by the instrument
- Air samplers and particle counters
- 5 models. Each saves CSV files to a USB drive.
- ApexZ3 and ApexZ50
- 2 models: particle counters. Each saves CSV, XLSX, LSDX or PDF files to a USB drive or network share.
3The Lighthouse Worldwide Solutions models.
These are Lighthouse Worldwide Solutions instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.
Particle counters
Particle counts per size channel for each sample volume and location, against the limits set.
- ApexP3
- ApexP5
- ApexR02
- ApexR02p
- ApexR03
- ApexR3
- ApexR03p
- ApexR3p
- ApexR05
- ApexR5
- ApexR05p
- ApexR5p
Show all 29 models
- ApexZ3
- ApexZ50
- Handheld 2016
- Handheld 3016
- Handheld 5016
- LS-20
- LS-60
- Remote 1100
- Remote 1104LD
- Remote 5104V
- Remote LPC 0.1µm
- Remote LPC 0.2µm
- Remote LPC 1.0µm
- ScanAir
- ScanAir Pro
- Vertex 50
- Vertex 100
Air samplers
The volume of air drawn onto each plate, with its location and time; the colony count is read after incubation.
- ActiveCount25H
- ActiveCount100
- ActiveCount100H
- ActiveCountR
- ActiveCountRp
Environmental monitors
Continuous readings, such as temperature, humidity, carbon dioxide or pressure, with alarms against limits.
- Remote Air Velocity Sensor
- Remote Differential Pressure Sensor
- Remote TRH-02-15
- Remote TRH-03-25
4Where the results go next.
Blueprints
- Environmental monitoring →
Link environmental results to locations, operations and investigations.
- Contamination control →
Connect contamination risks to controls and evidence of performance.
- Microbiology laboratory →
Track plates, organisms and results back to samples and batches.
5Start with one instrument.
Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Lighthouse Worldwide Solutions instruments.