Skip to main content

Particle Measuring Systems instruments in Seal

Seal Edge collects the files Particle Measuring Systems software saves and sends each original to Seal, linked to its sample, method and run.

Particle Measuring Systems instruments to SealInstrument export

Seal reads
Exports from FacilityPro, DataAnalyst and 3 more
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Particle Measuring Systems particle counters

  • FacilityPro
  • SamplerSight Pharma
  • DataAnalyst
  • and 2 more

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Location and sample

  • ≥0.5 µm
  • ≥5.0 µm
  • Volume
  • Original file, kept
How a result from the Particle Measuring Systems particle counters reaches Seal.

Results from the Particle Measuring Systems particle counters come from FacilityPro, SamplerSight Pharma or DataAnalyst, among 5 applications.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in FacilityPro, SamplerSight Pharma or DataAnalyst: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

FacilityPro
14 models: particle counters and air samplers.
DataAnalyst
3 models: particle counters and air samplers.
SamplerSight Pharma
3 models: particle counters.
FacilityNet
2 models: particle counters.
SamplerSight
2 models: particle counters.

Saved by the instrument

HandiLaz Mini II
1 model: particle counter. Saves data to an SD card or USB drive.
Lasair III
1 model: particle counter. Saves CSV files to a USB drive.
Lasair III 110
1 model: particle counter. Saves CSV files over USB.

3The Particle Measuring Systems models.

These are Particle Measuring Systems instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Particle counters

Particle counts per size channel for each sample volume and location, against the limits set.

  • AirNet II 201-4
  • AirNet II 301-4
  • AirNet II 310-4
  • AirNet II 501-4
  • AirNet II 510
  • AirNet II 510 XR
  • AirNet II 510-4
  • APSS-2000
  • HandiLaz Mini II
  • IsoAir 310P
  • IsoAir Pro-E
  • IsoAir Pro-Plus
  • Show all 22 models
  • Lasair EZ
  • Lasair II
  • Lasair III
  • Lasair III 110
  • Lasair Pro
  • LiQuilaz II E
  • LiQuilaz II S
  • NanoAir 10
  • SLS-20
  • SLS-1040

Air samplers

The volume of air drawn onto each plate, with its location and time; the colony count is read after incubation.

  • MiniCapt Mobile
  • MiniCapt Pro-E 25
  • MiniCapt Pro-Plus 25
  • MiniCapt Pro-Plus 100
  • MiniCapt Remote

4Where the results go next.

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Particle Measuring Systems instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.