Skip to main content

Microtrac instruments in Seal

Seal Edge collects the files Microtrac software saves and sends each original to Seal, linked to its sample, method and run.

Microtrac instruments to SealInstrument export

Seal reads
Exports from DIMENSIONS and DMS software
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Microtrac particle size analyzers

  • DIMENSIONS
  • DMS software

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and measurement

  • Dv10
  • Dv50
  • Dv90
  • Original file, kept
How a result from the Microtrac particle size analyzers reaches Seal.

Results from the Microtrac particle size analyzers come from DIMENSIONS or DMS software.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in DIMENSIONS or DMS software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

DIMENSIONS
10 models: particle size analyzers, light scattering instruments and zeta potential analyzers.
DMS software
1 model: particle size analyzer.

3The Microtrac models.

These are Microtrac instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Particle size analyzers

A particle size distribution with its summary values, such as Dv50 or a mean size.

  • AEROTRAC II
  • CAMSIZER 3D
  • CAMSIZER ONLINE
  • CAMSIZER P4
  • CAMSIZER S1
  • CAMSIZER X2+
  • CAMSIZER XL
  • SYNC GO
  • SYNC PLUS
  • SYNC PRO

Light scattering instruments

Size and polydispersity from dynamic light scattering, or molar mass from static and multi-angle light scattering.

  • NANOTRAC FLEX
  • NANOTRAC WAVE II

Zeta potential analyzers

Zeta potential from electrophoretic mobility, often with particle size.

  • NANOTRAC WAVE II Zeta
  • STABINO ZETA

4Where the results go next.

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Microtrac instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.