1How the results reach Seal.
In the laboratory
H.E.L Group bioreactors
- WinISO
Export folder
On the workstation or a network share
Seal Edge
Waits until each file is complete, then sends it
Outbound HTTPSNo inbound connection
Nothing is written back to the instrument or its software
In Seal
Seal Script
Checks the file’s layout and matches it to its record
Record
Culture run and vessel
- pH
- Dissolved oxygen
- Temperature
- Original file, kept
Results from the H.E.L Group bioreactors come from WinISO.
Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.
A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in WinISO: Seal collects completed results and sends nothing back to the instrument or its software.
How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.
2The H.E.L Group models.
These are H.E.L Group instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.
Bioreactors
Process values over time for each vessel, such as temperature, pH, dissolved oxygen, agitation, gas flows and feeds.
- BioXplorer 100
- BioXplorer 100P
- BioXplorer 100XL
- BioXplorer 400
- BioXplorer 400P
- BioXplorer 400XL
- BioXplorer 5000
- BioXplorer 5000P
Other
- Tandem Multiplex gas analyser
- Tandem PRO gas analyser
3Where the results go next.
Connection guides
Blueprints
- Upstream process development →
Compare bioreactor runs, feed strategies and culture performance.
- Process development →
Compare experiments and carry the selected process forward.
4Start with one instrument.
Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your H.E.L Group instruments.