Skip to main content

Kuhner instruments in Seal

Seal Edge collects the files Kuhner software saves and sends each original to Seal, linked to its sample, method and run.

Kuhner instruments to SealInstrument export

Seal reads
Exports from Kuhner Insight
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Kuhner incubators

  • Kuhner Insight

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Chamber

  • Temperature
  • Set point
  • Alarm
  • Original file, kept
How a result from the Kuhner incubators reaches Seal.

Results from the Kuhner incubators come from Kuhner Insight.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Kuhner Insight: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The Kuhner models.

These are Kuhner instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Incubators

Chamber temperature over time, with carbon dioxide and humidity where they are controlled, and alarm events.

  • ISF1-X
  • ISF1-Z
  • ISF1-Z Beluga
  • ISF1-Z Compressor
  • ISF1-Z EcoDew
  • ISF1-Z Peltier
  • ISF4-X
  • Kuhner Kelvin+
  • LS-X
  • LS-Z
  • LT-X
  • MPS-Z Automated
  • SBM/SS-X rack shaker
  • SR200-X

Bioreactors

Process values over time for each vessel, such as temperature, pH, dissolved oxygen, agitation, gas flows and feeds.

  • SB10-X
  • SB50-X
  • SB200-X
  • SB2500-Z

Other

  • Kuhner microTOM
  • Kuhner TOM

3Where the results go next.

Connection guides

Blueprints

4Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Kuhner instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.