Skip to main content

Biotage instruments in Seal

Seal IoT collects the files Biotage instrument software saves and sends each original to Seal over outbound HTTPS, linked to its sample, method and run.

Illustration of a seal following a sample vial to an analytical instrument and its result.

Biotage instruments to SealInstrument export

Seal reads
Exports from the Biotage software
Writes back
No
Source of truth
Instrument software
Set up
Seal IoT and an upload Script

1How the results reach Seal.

In the laboratory

Biotage preparative chromatography systems

  • The instrument’s software

Export folder

On the workstation or a network share

Seal IoT

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Purification run

  • Peak
  • Fraction
  • Elution volume
  • Original file, kept
How a result from the Biotage preparative chromatography systems reaches Seal.

Seal IoT runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay with the instrument and its software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The Biotage models.

These are Biotage instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Preparative chromatography systems

The run’s UV, conductivity and pressure curves, with the fractions collected and where each came from.

  • Flash 75
  • Flash 150
  • Flash 400
  • Selekt
  • Selekt Enkel

3Where the results go next.

Connection guides

Blueprints

4Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Biotage instruments.