Skip to main content

Gilson instruments in Seal

Seal Edge collects the files Gilson software saves and sends each original to Seal, linked to its sample, method and run.

Gilson instruments to SealInstrument export

Seal reads
Exports from Chromeleon CDS and Clarity
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Gilson HPLC / UHPLC systems

  • Chromeleon CDSSaves report exports selected in the installed Chromeleon version
  • ClaritySaves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf)

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and injection

  • Retention time
  • Peak area
  • Amount
  • Original file, kept
How a result from the Gilson HPLC / UHPLC systems reaches Seal.

Results from the Gilson HPLC / UHPLC systems come from Chromeleon CDS or Clarity.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Chromeleon CDS or Clarity: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

Chromeleon CDSThermo Fisher Scientific
14 models: LC autosamplers, LC detectors and LC pumps. Saves report exports selected in the installed Chromeleon version.
ClarityDataApex
11 models: LC pumps, LC detectors and fraction collectors. Saves results tables as TXT, CSV or Excel; chromatograms also as AIA (.cdf).

3The Gilson models.

These are Gilson instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

LC pumps

Flow, solvent composition and pressure, recorded by the chromatography data system with each injection; the results come from the detector.

  • 302 Pump
  • 303 Pump
  • 305 Pump
  • 306 Pump
  • 307 Pump
  • 331 Pump
  • 332 Pump
  • 333 Pump
  • 334 Pump

LC detectors

The detector’s signal over time is the chromatogram; the chromatography data system integrates its peaks into retention times, areas and amounts.

  • 112 Detector
  • 151 UV/VIS Detector
  • 152 UV/VIS Detector
  • 155 UV/VIS Detector
  • 156 UV/VIS Detector
  • 157 Detector
  • 159 Detector
  • PrepELS II Detector

LC autosamplers

Which vial and volume each injection took, recorded with its chromatogram so each result keeps its sample.

  • 215 Liquid Handler
  • 221XL Autosampler
  • 222XL Autosampler
  • 231XL Autosampler
  • 232XL Autosampler
  • 233XL Autosampler

Fraction collectors

Where each fraction went and the part of the chromatogram it was collected from.

  • FC 203B Fraction Collector
  • FC 204 Fraction Collector

Liquid handlers

A record of what moved where: source and destination labware and wells, volumes and any errors in each run.

  • PIPETMAX 278

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Gilson instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.