Skip to main content

Bio-Techne instruments in Seal

Seal Edge collects the files Bio-Techne software saves and sends each original to Seal, linked to its sample, method and run.

Illustration of a seal beside a ProteinSimple Jess.

Bio-Techne instruments to SealInstrument export

Seal reads
Exports from Compass for Simple Western and Compass for iCE
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Bio-Techne capillary electrophoresis systems

  • Compass for iCESaves Compass for iCE results-table and electropherogram exports

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and injection

  • Peak
  • Migration time
  • Corrected area %
  • Original file, kept
How a result from the Bio-Techne capillary electrophoresis systems reaches Seal.

Results from the Bio-Techne capillary electrophoresis systems come from Compass for iCE.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Compass for iCE: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

Compass for iCE
4 models: capillary electrophoresis systems. Saves Compass for iCE results-table and electropherogram exports.

3The Bio-Techne models.

These are Bio-Techne instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Western blot systems

The size and signal of each protein band or peak, from a blot image or a capillary run.

  • Abby
  • Jess
  • Leo
  • Milo
  • Peggy Sue
  • Sally Sue
  • Wes

Capillary electrophoresis systems

An electropherogram for each sample, integrated into peaks for size, charge variants or purity.

  • iCE3
  • Maurice
  • Maurice C.
  • Maurice S.
  • MauriceFlex

Particle size analyzers

A particle size distribution with its summary values, such as Dv50 or a mean size.

  • MFI 5100
  • MFI 5200

Automated immunoassay systems

Analyte concentrations for each sample from the assay’s calibration curve.

  • Ella

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Bio-Techne instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.