1How the results reach Seal.
In the laboratory
TA Instruments thermal analyzers
- TRIOSSaves TRIOS ASCII, CSV or Excel exports
- RSCS software
Export folder
On the workstation or a network share
Seal Edge
Waits until each file is complete, then sends it
Outbound HTTPSNo inbound connection
Nothing is written back to the instrument or its software
In Seal
Seal Script
Checks the file’s layout and matches it to its record
Record
Sample and run
- Transition
- Onset
- Mass loss
- Original file, kept
Results from the TA Instruments thermal analyzers come from TRIOS or RSCS software.
Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.
A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in TRIOS or RSCS software: Seal collects completed results and sends nothing back to the instrument or its software.
How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.
2The software and what it saves.
- TRIOS
- 21 models: thermal analyzers, DSC and rheometers. Saves TRIOS ASCII, CSV or Excel exports.
- ITCRun
- 3 models: calorimeters.
- DSCRun
- 2 models: DSC.
- TAM Assistant
- 2 models: calorimeters.
- NanoAnalyze
- 1 model: DSC.
- RSCS software
- 1 model: thermal analyzer.
- TAM IV Lab Assistant
- 1 model: calorimeter.
3The TA Instruments models.
These are TA Instruments instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.
Thermal analyzers
Heat flow, mass or dimension against temperature, evaluated into transitions, mass loss or expansion.
- Discovery DMA 850
- Discovery HP TGA
- Discovery SA
- Discovery SDT 650
- Discovery TGA 55
- Discovery TGA 550
- Discovery TGA 5500
- Discovery TMA 450
- DynTHERM
- IsoSORP
- RSA-G2 Solids Analyzer
- TMA 450 RH
DSC
Heat flow against temperature, evaluated into transitions such as melting temperature and enthalpy.
- Coin Cell Differential Scanning Calorimeter
- Discovery DSC 25
- Discovery DSC 250
- Discovery DSC 2500
- Multi-Sample X3 DSC
- Nano DSC
- Nano DSC Auto
- Pressure DSC 25P
- RS-DSC
Calorimeters
Heat measured over time; in titration calorimetry, the heat of each injection fitted to binding affinity, stoichiometry and enthalpy.
- Affinity ITC
- Affinity ITC Auto
- Nano ITC
- TAM Air
- TAM IV
- TAM IV-48
Rheometers
Viscosity and viscoelastic moduli against shear rate, time or temperature.
- ARES-G2
- ARES-G3
- Discovery Core Rheometer
- Discovery HR 10
- Discovery HR 30
4Where the results go next.
Blueprints
- Analytical development →
Connect method experiments and performance to the intended analytical purpose.
- QC laboratory →
Follow samples from receipt through testing and result review.
5Start with one instrument.
Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your TA Instruments instruments.
