Skip to main content

Standard BioTools instruments in Seal

Seal Edge collects the files Standard BioTools software saves and sends each original to Seal, linked to its sample, method and run.

Standard BioTools instruments to SealInstrument export

Seal reads
Exports from CyTOF Software and Biomark X9 System Software
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Standard BioTools Hyperion Imaging System and Hyperion XTi Imaging System

  • CyTOF Software

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and image

  • Image
  • Measurement
  • Settings
  • Original file, kept
How a result from the Standard BioTools Hyperion Imaging System and Hyperion XTi Imaging System reaches Seal.

Results from the Standard BioTools Hyperion Imaging System and Hyperion XTi Imaging System come from CyTOF Software.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in CyTOF Software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

CyTOF Software
6 models: mass cytometers and imaging systems.
Biomark X9 System Software
1 model: qPCR system.

3The Standard BioTools models.

These are Standard BioTools instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Mass cytometers

  • CyTOF 2
  • CyTOF XT
  • CyTOF XT PRO
  • Helios

Imaging systems

Images with their acquisition settings, and measurements where analysis software takes them.

  • Hyperion Imaging System
  • Hyperion XTi Imaging System

qPCR systems

An amplification curve for each well, with its Cq value and the quantity or melt result derived from it.

  • Biomark X9 System

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Standard BioTools instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.