Skip to main content

Maintenance and assets integrations

Connect calibration records, equipment history and maintenance work with production events, recurring failures and quality investigations.

Illustration of a seal beside a laptop showing a data table and an evidence binder linked by a red thread.

What these systems hold.

Calibration and maintenance systems hold the equipment register, calibration results and due dates, work orders and maintenance history.

Instruments must be calibrated at suitable intervals under a written programme, and an instrument that does not meet its specification must not be used (21 CFR 211.160(b)(4)). Major equipment needs a log of cleaning, maintenance and use that shows the date, product and lot of each batch (21 CFR 211.182). When a calibration fails, the question is which batches used the instrument since it was last shown to be in tolerance.

What Seal reads and writes back.

Blue Mountain RAM, IBM Maximo, MaintainX and Fiix are scoped against each provider’s API, and ProCal through its Data Exchange Utility or Connector with Seal’s API and Scripts. Seal reads asset, calibration and work-order records and matches equipment identities to recorded use. A change in the maintenance system needs a separately approved action, and which system holds each record is agreed when the connection is scoped.

Seal
  1. Blue Mountain RAM, IBM Maximo, MaintainX, FiixSource of truth agreed when scoped

    Reads Selected records your edition exposes

    Writes back If separately approved

  2. ProCalSource of truth agreed when scoped

    Reads Supplied calibration record and equipment-use history

    Writes back If agreed

5 connections

Blueprints that use these records.

Start with one source.

Tell us what Neil needs to do and where the records live. We’ll scope the connection with your team.

Book a demo