Skip to main content

SPT Labtech instruments in Seal

Seal IoT collects the files dragonfly software and firefly software save and sends each original to Seal over outbound HTTPS, linked to its sample, method and run.

Illustration of a seal following a sample vial to an analytical instrument and its result.

SPT Labtech instruments to SealInstrument export

Seal reads
Exports from dragonfly software and firefly software
Writes back
No
Source of truth
Instrument software
Set up
Seal IoT and an upload Script

1How the results reach Seal.

In the laboratory

SPT Labtech liquid handlers

  • dragonfly software
  • firefly software

Export folder

On the workstation or a network share

Seal IoT

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Transfer run

  • Source well
  • Destination well
  • Volume
  • Original file, kept
How a result from the SPT Labtech liquid handlers reaches Seal.

Results from the SPT Labtech liquid handlers come from dragonfly software or firefly software.

Seal IoT runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in dragonfly software or firefly software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

dragonfly software
2 models: liquid handlers.
firefly software
1 model: liquid handler.

3The SPT Labtech models.

These are SPT Labtech instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Liquid handlers

A record of what moved where: source and destination labware and wells, volumes and any errors in each run.

  • apricot DC1
  • apricot PP5
  • apricot S1
  • apricot S3
  • dragonfly crystal
  • dragonfly discovery
  • firefly
  • mosquito crystal
  • mosquito Gen3
  • mosquito HV
  • mosquito HV genomics
  • mosquito LCP
  • mosquito LV
  • mosquito LV genomics
  • mosquito X1
  • mosquito xtal3

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your SPT Labtech instruments.