Skip to main content

Sony Biotechnology instruments in Seal

Seal Edge collects the files Sony Biotechnology software saves and sends each original to Seal, linked to its sample, method and run.

Sony Biotechnology instruments to SealInstrument export

Seal reads
Exports from CGX10 Cell Isolation System Software, FCS Express and 4 more
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Sony Biotechnology flow cytometers

  • CGX10 Cell Isolation System Software
  • FCS Express
  • FP7000 Spectral Cell Sorter software
  • and 3 more

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Sample and acquisition

  • Population
  • Count
  • % of parent
  • Original file, kept
How a result from the Sony Biotechnology flow cytometers reaches Seal.

Results from the Sony Biotechnology flow cytometers come from CGX10 Cell Isolation System Software, FCS Express or FP7000 Spectral Cell Sorter software, among 6 applications.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in CGX10 Cell Isolation System Software, FCS Express or FP7000 Spectral Cell Sorter software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

CGX10 Cell Isolation System Software
1 model: flow cytometer.
FCS Express
1 model: flow cytometer.
FP7000 Spectral Cell Sorter software
1 model: flow cytometer.
ID7000 software
1 model: flow cytometer.
MA900 software
1 model: flow cytometer. Saves FCS files.
SH800S software
1 model: flow cytometer. Saves FCS 3.0 or 3.1 files.

3The Sony Biotechnology models.

These are Sony Biotechnology instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Flow cytometers

An FCS file of events for each sample, gated into population counts and percentages.

  • CGX10 Cell Isolation System
  • FP7000 Spectral Cell Sorter
  • FX500 Exchangeable Fluidics Cell Sorter
  • ID7000 Spectral Cell Analyzer
  • MA900 Multi-Application Cell Sorter
  • SA3800 Spectral Analyzer
  • SH800S Cell Sorter
  • SP6800 Spectral Cell Analyzer

Imaging systems

Images with their acquisition settings, and measurements where analysis software takes them.

  • SI8000 Cell Motion Imaging System

4Where the results go next.

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Sony Biotechnology instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.