1The Cytek Biosciences models.
These are Cytek Biosciences instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.
Flow cytometers
- Amnis CellStream
- Amnis FlowSight
- Amnis ImageStreamX Mk II Imaging Flow Cytometer
- Aurora
- Aurora CS
- Aurora Evo
- Borealis Flow Cytometer
- Cytek Aurora
- DxP Athena
- Guava easyCyte 5
- Guava easyCyte 5HT
- Guava easyCyte 6-2L
- Guava easyCyte 6HT-2L
- Guava easyCyte 8
- Guava easyCyte 8HT
- Guava easyCyte 11HT
- Guava easyCyte 12HT
- Guava easyCyte HT BG
- Guava easyCyte HT BGR
- Guava easyCyte HT BGV
- Guava easyCyte Plus
- Guava PCA
- NL-CLC
- Northern Lights
Cell analyzers
- Guava Muse Cell Analyzer
- Muse Micro
Other
- Orion
2How Seal collects the results.
Seal IoT runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. For these instruments that is usually InCyte, INSPIRE and SpectroFlo. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.
A Seal Script checks the export’s layout, resolves the run and sample it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and the vendor’s analysis stay in the instrument software: Seal collects completed results and sends no instructions to the instrument.
How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.
3Start with one instrument.
Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Cytek Biosciences instruments.