Skip to main content

Distek instruments in Seal

Seal Edge collects the files Distek software saves and sends each original to Seal, linked to its sample, method and run.

Distek instruments to SealInstrument export

Seal reads
Exports from BIOne Core Software and Cipher Software
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Distek dissolution testers

  • Cipher Software

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Test and vessel

  • Time point
  • % dissolved
  • Temperature
  • Original file, kept
How a result from the Distek dissolution testers reaches Seal.

Results from the Distek dissolution testers come from Cipher Software.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Cipher Software: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

BIOne Core Software
3 models: bioreactor controllers.
Cipher Software
1 model: dissolution tester.

3The Distek models.

These are Distek instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Dissolution testers

The test conditions for each vessel (time, temperature and speed) and the samples drawn; the percentage dissolved comes from their analysis.

  • Model 2500
  • Model 2500 RTD
  • Model 2500 Select
  • OLERA
  • OLERA Plus
  • OLERA Select
  • Opt-Diss 410

Bioreactor controllers

Process values over time for each vessel it controls, such as temperature, pH, dissolved oxygen and gas flows.

  • BIOne 250
  • BIOne 1250
  • BIOne 1250 Dual

Disintegration testers

The disintegration time for each basket position.

  • sensIR 3200

Other

  • BIOne Mixing System
  • Eclipse 5300
  • ezfill+

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Distek instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.