Skip to main content

Berthold Technologies instruments in Seal

Seal Edge collects the files Berthold Technologies software saves and sends each original to Seal, linked to its sample, method and run.

Illustration of a seal beside a Berthold TriStar² S LB 942 plate reader.

Berthold Technologies instruments to SealInstrument export

Seal reads
Exports from WinTerm, LightCompass and 2 more
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

Berthold Technologies luminometers

  • WinTermSaves readings straight into Excel
  • FB12 Sirius Software
  • LightCompassSaves results as Excel exports

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Plate and sample

  • Well
  • RLU
  • Result
  • Original file, kept
How a result from the Berthold Technologies luminometers reaches Seal.

Results from the Berthold Technologies luminometers come from WinTerm, FB12 Sirius Software or LightCompass.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in WinTerm, FB12 Sirius Software or LightCompass: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

WinTerm
8 models: luminometers. Saves readings straight into Excel.
LightCompass
5 models: luminometers and plate readers. Saves results as Excel exports.
FB12 Sirius Software
3 models: luminometers.
ICE or MikroWin
2 models: plate readers. Saves data as Excel, text or CSV files.
Chromeleon CDSThermo Fisher Scientific
1 model: LC detector. Saves report exports selected in the installed Chromeleon version.

Saved by the instrument

Sirius 2 LB 9526
1 model: luminometer. Saves CSV, PDF and HTML files to a USB drive.

3The Berthold Technologies models.

These are Berthold Technologies instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Luminometers

Light output (RLU) for each sample or well.

  • AutoCliniLumat LB 952
  • AutoLumat 2 LB 956
  • AutoLumat LB 953
  • Automated Luminescence Analyzer LB 950
  • AutorackLumat LB 954
  • Biolumat LB 9505
  • Centro LB 960
  • Centro LB 963
  • Centro XS
  • CentroLIA LB 961
  • CentroLIApc LB 962
  • CentroPRO LB 962
  • Show all 27 models
  • CliniLumat LB 9502
  • FB12
  • FB15 Sirius
  • Flash n'Glow LB 955
  • Junior LB 9509
  • Lumat LB 9500
  • Lumat LB 9501
  • Lumat LB 9507
  • Lumat LB 9508
  • Lumat LB 9510
  • Microlumat LB 96 P
  • Microlumat LB 96 V
  • MiniLumat LB 9506
  • Orion II LB 965
  • Sirius 2 LB 9526

Plate readers

A value for each well (absorbance, fluorescence or luminescence), often reduced to concentrations against a standard curve.

  • Apollo 1 LB 911
  • Apollo 8 LB 912
  • Apollo 11 LB 913
  • Apollo LB 917
  • Mithras LB 940
  • Mithras² LB 943
  • TriStar 2 LB 942
  • Tristar 3
  • Tristar 5
  • TriStar LB 941
  • TriStar² S LB 942
  • Twinkle LB 970

LC detectors

The detector’s signal over time is the chromatogram; the chromatography data system integrates its peaks into retention times, areas and amounts.

  • FlowStar LB 509
  • FlowStar LB 513
  • FlowStar LB 514
  • HERM LB 500
  • LB 507 Radioactivity Monitor

Microplate washers

Runs the wash steps between assay stages; it measures nothing itself, so the result comes from the reader.

  • Zoom HT LB 920
  • Zoom LB 921

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your Berthold Technologies instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.