Skip to main content

BMG LABTECH instruments in Seal

Seal Edge collects the files BMG LABTECH software saves and sends each original to Seal, linked to its sample, method and run.

Illustration of a seal beside a BMG LABTECH CLARIOstar Plus plate reader.

BMG LABTECH instruments to SealInstrument export

Seal reads
Exports from Reader Control and MARS and SMART Control and MARS
Writes back
No
Source of truth
Instrument software
Set up
Seal Edge and an upload Script

1How the results reach Seal.

In the laboratory

BMG LABTECH plate readers

  • Reader Control and MARSSaves MARS Excel or ASCII result exports
  • SMART Control and MARS

Export folder

On the workstation or a network share

Seal Edge

Waits until each file is complete, then sends it

Outbound HTTPSNo inbound connection

Nothing is written back to the instrument or its software

In Seal

Seal Script

Checks the file’s layout and matches it to its record

Record

Plate and sample

  • Well
  • Reading
  • Concentration
  • Original file, kept
How a result from the BMG LABTECH plate readers reaches Seal.

Results from the BMG LABTECH plate readers come from Reader Control and MARS or SMART Control and MARS.

Seal Edge runs on the instrument workstation, or a host that can read the files, and watches the folder the software exports to. When a file is complete it sends it to Seal over outbound HTTPS; no inbound connection to the workstation is needed.

A Seal Script checks the export’s layout, resolves the record it belongs to and writes the selected values into typed fields. The original file is kept with the result. Acquisition and analysis stay in Reader Control and MARS or SMART Control and MARS: Seal collects completed results and sends nothing back to the instrument or its software.

How capture works and what IT confirms are set out on the instruments page; the setup instructions cover installation.

2The software and what it saves.

Reader Control and MARS
10 models: plate readers and luminometers. Saves MARS Excel or ASCII result exports.
SMART Control and MARS
1 model: plate reader.

3The BMG LABTECH models.

These are BMG LABTECH instruments laboratories connect to Seal, listed from the manufacturer’s own documents. A model not listed here works the same way if its software saves a file: send us the model and an example output.

Plate readers

A value for each well (absorbance, fluorescence or luminescence), often reduced to concentrations against a standard curve.

  • CLARIOstar
  • CLARIOstar Plus
  • FLUOstar Galaxy
  • FLUOstar Omega
  • FLUOstar OPTIMA
  • NEPHELOstar
  • NEPHELOstar Plus
  • NOVOstar
  • PHERAstar FS
  • PHERAstar FSX
  • PHERAstar Plus
  • POLARstar Galaxy
  • POLARstar Omega
  • POLARstar OPTIMA
  • RUBYstar
  • SPECTROstar Nano
  • SPECTROstar Omega
  • VANTAstar

Luminometers

Light output (RLU) for each sample or well.

  • LUMIstar Galaxy
  • LUMIstar Omega
  • LUMIstar OPTIMA

4Where the results go next.

Connection guides

Blueprints

5Start with one instrument.

Bring the model, the installed software version and an example output. We map the connection into your workflow and test it with a late file, a duplicate transfer and a failed integrity check before you rely on it. Discuss your BMG LABTECH instruments.

See your process in Seal.

Bring a procedure or a recurring problem. See how your team configures it with Neil and improves the next run.